Back to all Biology topics
Topic 5.1Biology76 flashcards

Experimental and data skills

Practice Flashcards

Flip cards to reveal answers
Card 1 of 765.1.1
5.1.1
Question

Define the independent variable.

Click to reveal answer

Track your progress — Sign up free to save your progress and get smart review reminders based on spaced repetition.

All Flashcards in Topic 5.1

Below are all 76 flashcards for this topic. Sign up free to track your progress and get personalized review schedules.

5.1.19 cards

Card 1definition
Question

Define the independent variable.

Answer

The single factor you deliberately **change** (manipulate) — the cause you are testing. Plotted on the **x-axis**.

Card 2definition
Question

Define the dependent variable.

Answer

The factor you **measure** as the outcome; it **depends on** the independent variable. Plotted on the **y-axis**.

Card 3definition
Question

Define a controlled variable.

Answer

A factor kept **constant** in every trial so it cannot affect the result — this keeps the test **fair**.

Card 4concept
Question

Controlled variable vs control treatment — what's the difference?

Answer

A **controlled variable** is a factor held **constant**. A **control treatment** is a whole **baseline run** with the tested factor **absent**, used for comparison.

Card 5concept
Question

Why must you change only ONE independent variable?

Answer

If two things change together you get a **confounding variable** — you can't tell which factor caused the result, so the test is **invalid**.

Card 6concept
Question

How should you name a controlled variable in the exam?

Answer

**Specifically**, with its quantity (e.g. 'temperature at 22 °C', 'volume of solution'), never 'keep everything the same'.

Card 7concept
Question

What is a suitable control for a substance dissolved in a solvent?

Answer

The same volume of the solvent alone, so any effect of the solvent shows up.

Card 8concept
Question

Why might the control group in a drug trial get an existing drug?

Answer

Leaving patients with a serious illness untreated would be unethical.

Card 9concept
Question

How do you keep temperature or pH constant?

Answer

Temperature: a water bath or incubator. pH: a buffer solution.

5.1.106 cards

Card 10definition
Question

State the equation for an Rf value.

Answer

$R_f = \dfrac{\text{distance moved by the pigment}}{\text{distance moved by the solvent}}$ — both measured from the start line. It has **no units** and is always between **0 and 1**.

Card 11concept
Question

A pigment moves 45 mm; the solvent moves 90 mm. What is the Rf?

Answer

Rf = 45 ÷ 90 = **0.50** (no units, because it is a ratio of two lengths).

Card 12concept
Question

On a chromatogram, which pigment is the most soluble?

Answer

The one that travels **furthest** — it has the **highest Rf**. The lowest Rf is the least soluble.

Card 13concept
Question

How do quadrats let you estimate a whole population?

Answer

Count in several quadrats, take a **mean per quadrat**, find the **density (number per m²)**, then **scale up** to the total habitat area. Using a mean of many quadrats improves reliability.

Card 14concept
Question

What does gel electrophoresis separate, and how?

Answer

It separates **DNA fragments by SIZE**: DNA is negatively charged, so an electric field pulls it through the gel and the **smallest fragments travel furthest**.

Card 15definition
Question

Which technique amplifies DNA, and which instrument measures respiration rate?

Answer

**PCR** amplifies (copies) DNA; a **respirometer** measures respiration rate (oxygen used per unit time).

5.1.29 cards

Card 16definition
Question

What is a replicate, and why take several?

Answer

A **replicate** is one repeat of the same measurement. Several let you take a **mean** (reducing random error), **spot anomalies**, and check the result is **repeatable**.

Card 17concept
Question

How do you make a result more reliable?

Answer

**Repeat each measurement more times and take the mean.** More replicates even out random error and make an anomaly stand out.

Card 18definition
Question

Formula: the mean of a set of repeats?

Answer

$\bar{x} = \dfrac{\sum x}{n}$ — add the readings and divide by how many there are. The spread (range $=$ max $-$ min, or the standard deviation) shows how reliable the repeats are: small spread = reliable.

Card 19concept
Question

Reliable vs valid vs accurate?

Answer

**Reliable** = repeats of the same method agree. **Valid** = a fair test of the claim (a control + only one variable changed). **Accurate** = close to the true value.

Card 20concept
Question

How do you spot an anomaly?

Answer

It sits **far outside the other repeats**. You re-check it or leave it out of the mean — which is only possible because you took several repeats.

Card 21concept
Question

How do you EVALUATE whether data support a claim?

Answer

State **what the data show** (e.g. the means differ), then **weigh it against the limitations** (small sample, big spread/overlap, no control) for a **balanced** judgement.

Card 22concept
Question

What makes an improvement answer score the mark?

Answer

A **fix PLUS a matched reason** — e.g. 'more replicates **so the mean is more reliable**' or 'add a control **so the effect is shown to be due to the variable**'. A bare fix scores half.

Card 23concept
Question

Random error or systematic error?

Answer

Random error scatters readings both ways: repeat and take a mean. Systematic error shifts every reading the same way: calibrate the instrument.

Card 24concept
Question

When may you leave an outlier out of the mean?

Answer

Only when you can give a reason, such as a counting mistake or a leaking tube.

5.1.37 cards

Card 25concept
Question

What is the magnification formula?

Answer

$M = \dfrac{\text{image size}}{\text{actual size}}$ — both in the **same unit**. It's a ratio, so it has **no units** (write $\times N$).

Card 26concept
Question

How do you calculate a real (actual) size?

Answer

Rearrange the triangle: $\text{actual} = \dfrac{\text{image size}}{M}$. Convert to one unit, then **divide the image size by the magnification**.

Card 27concept
Question

How do you use a scale bar to find magnification?

Answer

Measure the bar on the image (e.g. $40\text{ mm} = 40\,000\ \mu\text{m}$), read the real distance it represents (e.g. $80\ \mu\text{m}$), then $M = 40\,000 \div 80 = \times 500$.

Card 28concept
Question

How do you convert mm to µm (and why)?

Answer

**Multiply by 1000** ($1\text{ mm} = 1000\ \mu\text{m}$). Image lengths are in mm but cells are in µm — match units **before** dividing or you'll be 1000× out.

Card 29concept
Question

If each division on an image is 2.5 µm and a cell spans 20 divisions, how long is it?

Answer

Real size = divisions × µm per division = $20 \times 2.5 = 50\ \mu\text{m}$.

Card 30definition
Question

What equipment measures a cell's size down the microscope?

Answer

An **eyepiece graticule**, calibrated against a **stage micrometer** (not a plain ruler).

Card 31concept
Question

How do you produce a scale bar?

Answer

Choose a round real length, multiply it by the magnification to get the bar length, draw it and label it with the real length.

5.1.49 cards

Card 32concept
Question

How do you 'read off' a value from a graph?

Answer

Find the **x-value**, go **up to the curve**, **across to the y-axis**, read the height — and write it **with its unit**.

Card 33definition
Question

Interpolate vs extrapolate?

Answer

**Interpolate** = estimate a value **between** plotted points (safe). **Extrapolate** = predict a value **beyond** the data (a prediction — the trend may not hold).

Card 34concept
Question

Estimating y between two points — what's the quick method?

Answer

Take roughly the **midpoint** of the neighbouring readings, e.g. $y \approx \dfrac{30 + 42}{2} = 36$ (with the unit).

Card 35concept
Question

What must a full 'describe the trend' answer contain?

Answer

**Direction first** (rises/falls), then the **change of pattern** (plateau or peak), each backed by **figures** from the graph.

Card 36concept
Question

What must a 'compare and contrast' answer contain?

Answer

At least **one similarity AND one difference** between the series, each supported by a **value** from the data.

Card 37concept
Question

What does a 'predict' answer need besides a value?

Answer

A **reason** drawn from the trend — and you should flag it as a prediction (extrapolation), since the trend might change.

Card 38concept
Question

Why is '44' wrong but '44 µmol min⁻¹' right?

Answer

A value with **no unit** scores nothing — always quote the **unit** read from the axis.

Card 39concept
Question

How do you read a box-and-whisker plot?

Answer

Whisker ends = smallest and largest values; box = lower to upper quartile; thick line in the box = median.

Card 40concept
Question

Why can a % chart not show which group eats more of a food?

Answer

It shows each food's share of a group's own total; the groups' totals may differ.

5.1.58 cards

Card 41concept
Question

Formula: percentage change

Answer

$\% \text{ change} = \dfrac{\text{new} - \text{old}}{\text{old}} \times 100$ — always divide the CHANGE by the OLD value. A negative answer is a percentage decrease.

Card 42concept
Question

Formula: rate from a graph

Answer

rate $= \dfrac{\text{change in quantity}}{\text{time}} = \dfrac{\text{rise}}{\text{run}}$ — the GRADIENT of the line. Take two points and divide; always write the units.

Card 43concept
Question

Formula: ratio / index

Answer

ratio = $\frac{\text{part}}{\text{whole}}$, e.g. mitotic index = $\frac{\text{cells in mitosis}}{\text{all cells counted}}$; it has no unit.

Card 44concept
Question

Percentage change vs 'percentage of'

Answer

**% change** = $\frac{\text{new} - \text{old}}{\text{old}} \times 100$ (how much it moved). **% of** = $\frac{\text{part}}{\text{whole}} \times 100$ (what share it is).

Card 45definition
Question

How do you find the range of a data set?

Answer

range = largest value − smallest value.

Card 46concept
Question

What is the percentage-change formula (treatment vs control)?

Answer

$\%\ \text{change} = \dfrac{\text{final} - \text{initial}}{\text{initial}} \times 100$. Use the **control** value as the 'initial'.

Card 47concept
Question

Why must a rate have units?

Answer

A rate is a quantity PER unit time; without the unit (e.g. cm³ s⁻¹, breaths min⁻¹) it is incomplete and loses the mark.

Card 48concept
Question

What is the unit of body mass index?

Answer

kg m⁻²: mass in kg divided by the square of height in m. Each 'per' is a negative power.

5.1.66 cards

Card 49definition
Question

What is the formula for the mean?

Answer

$\bar{x} = \dfrac{\sum x}{n}$ — **add all the values and divide by how many there are** ($n$). The mean keeps the same units as the data.

Card 50concept
Question

Mean vs median vs mode?

Answer

**Mean** = add-up-and-divide average. **Median** = the **middle** value in order. **Mode** = the **most common** value (tallest bar on a frequency graph).

Card 51definition
Question

What does standard deviation (s) measure?

Answer

How **spread out** the data are around the mean. **Small s** = tightly clustered; **large s** = widely scattered. You find it on your GDC, not by hand.

Card 52definition
Question

What does an error bar represent?

Answer

The **spread** of the data about the mean: usually ± 1 standard deviation, sometimes the standard error or the range. A longer bar means more spread, so a less reliable mean.

Card 53concept
Question

State the overlap rule for error bars.

Answer

Error bars **overlap**: the difference **may not be significant**. A **clear gap**: the difference is **likely** to be significant; a statistical test confirms it.

Card 54concept
Question

On a box-and-whisker plot, what are the key features?

Answer

**Median** = line inside the box; **box** = lower to upper quartile (the middle half); **whiskers** = smallest and largest values that are not outliers; a **separate point** = an **outlier** (more than 1.5 × IQR beyond the box).

5.1.78 cards

Card 55concept
Question

Which test compares counts against an expected ratio (or tests an association)?

Answer

The **chi-squared (χ²) test** — it is for **counts/frequencies**, e.g. testing a 3:1 genetic ratio.

Card 56concept
Question

Which test compares two means of a measured variable?

Answer

The **t-test** — use it to ask whether **two averages** are significantly different.

Card 57definition
Question

What is the chi-squared formula?

Answer

$\chi^2 = \sum \dfrac{(O-E)^2}{E}$ — where **O** = observed count, **E** = expected count; add one term per category.

Card 58concept
Question

How do you decide if a result is statistically significant?

Answer

Compare the **calculated** statistic to the **critical value** at **p = 0.05**: if **calculated ≥ critical**, it is **significant** (p < 0.05) → reject H₀.

Card 59definition
Question

What are the null (H₀) and alternative (H₁) hypotheses?

Answer

**H₀**: there is **no** real difference/association (any difference is chance). **H₁**: there **is** a real difference/association.

Card 60concept
Question

What do overlapping error bars suggest about two means?

Answer

That the means are **probably not significantly different** — a t-test would give t below the critical value (p > 0.05).

Card 61concept
Question

How do you find degrees of freedom?

Answer

For **χ²**: (number of categories − 1). For a **t-test of two groups**: $df = n_1 + n_2 - 2$. The df picks the row of the critical-value table.

Card 62concept
Question

What do stars over a bracket on a graph mean?

Answer

The result of a test between two bars: ns means p > 0.05 (not significant); *, ** and *** mean p < 0.05, p < 0.01 and p < 0.001.

5.1.88 cards

Card 63concept
Question

Positive vs negative correlation?

Answer

**Positive**: as one variable rises, the other **rises** (line slopes up). **Negative**: as one rises, the other **falls** (line slopes down).

Card 64concept
Question

What does the correlation coefficient r tell you, and what is its range?

Answer

It measures a linear correlation from **−1 to +1**: the **sign** = direction (+ together, − opposite) and the **size** (how close to ±1) = **strength**. $r ≈ 0$ = no linear relationship.

Card 65concept
Question

How is the coefficient of determination R² related to r?

Answer

**$R^2 = r^2$.** It is the **fraction (or %) of the variation** in y explained by x. e.g. $r = 0.9 → R^2 = 0.81 →$ ~81% explained. Given R², $r = \pm\sqrt{R^2}$.

Card 66concept
Question

Why does correlation NOT prove causation?

Answer

A **third (confounding) variable** or coincidence could cause both. Only a **controlled experiment** can establish that one variable causes a change in another.

Card 67concept
Question

How do you DESCRIBE a relationship shown by a graph?

Answer

State the **direction** (positive/negative correlation) **and** quote a **figure/comparison** from the data — not just 'there is a relationship'.

Card 68concept
Question

r = −0.9 vs r = +0.9 — which is stronger?

Answer

**Equally strong** — strength depends on $|r|$ (how close to 1), not the sign. They differ only in **direction**.

Card 69concept
Question

How do you describe a relationship on a curve or a log-scale graph?

Answer

Name both variables and the direction, for example 'a positive correlation: larger animals have a higher metabolic rate'. 'Directly proportional' needs a straight line through the origin.

Card 70concept
Question

Does a species' rising percentage of a sample show its population grew?

Answer

No. A percentage is a share of the sample, not a number: if the whole sample shrank, the species may have fallen in number.

5.1.96 cards

Card 71concept
Question

State Simpson's reciprocal diversity index formula.

Answer

$D = \dfrac{N(N-1)}{\sum n(n-1)}$ — where $N$ = total individuals (all species) and $n$ = individuals of each species. Higher $D$ = more diverse (minimum 1).

Card 72concept
Question

State the Lincoln (capture–mark–recapture) index formula.

Answer

$N = \dfrac{n_1 \times n_2}{n_3}$ — $n_1$ = marked & released, $n_2$ = second catch, $n_3$ = marked individuals in the second catch, $N$ = estimated total.

Card 73definition
Question

In Simpson's index, what are $N$ and $n$?

Answer

$N$ = the TOTAL number of individuals of ALL species added together; $n$ = the number of individuals of ONE particular species.

Card 74concept
Question

Two communities have the same number of species — why might their $D$ differ?

Answer

Because $D$ also depends on **evenness**. A community dominated by one species has a LOWER $D$ than one where individuals are spread evenly.

Card 75concept
Question

Name two assumptions of the Lincoln index.

Answer

Marks don't harm the animals or change catchability; marked animals mix back fully; no births, deaths or migration between samples; marks aren't lost.

Card 76concept
Question

How do you use Simpson's index to measure biodiversity CHANGE over time?

Answer

Sample the same site with the same method each year, calculate $D$ each time, and compare — a rising $D$ means biodiversity is increasing.

Want smart review reminders?

Sign up free to track your progress. Our spaced repetition algorithm will tell you exactly which cards to review and when.

Start Free